Methods of use
Power lndicator Lamp
lllustration of Control Panel
1. Display window: 2 digits LED display window can show the current water
temperature.
2. Power indicator lamp: when power supply is connected, green light is on; when
power supply is cut off, green light is off.
3. Heating lndicator Lamp: when water heater is heating, red light is on; when water
heater stops heating or in warming condition, red light is off.
4. Temperature control knob: adjusting water temperature.
Operation
1. Setting water heating temperature
Turn the temperature control knob can adjust heating temperature.
Th e temperature adjusting range is 30-75 ºC. Rotate clockwise to get higher
temperature, rotate counterclockwise to get lower temperature. lt is better to turn
control knob to high temperature area in arder to get more hot water.
2. Heating and warming
The water heater can control the temperature automatically. When heats to adjust
the temperature, the water heater will cut off the supply of energy and will stop
heating. When the water temperature drops to a certain value, The water heater will
connect the power supply and reheat. Note: Hot water is supplied in heating /
heating mode.
3. Stop heating
When the control knob locates at "off', power supply would be cut off and water
heater stop heating.
display window
15
Temperture control knob