First Steps; Attaching The Shoulder Strap; Attaching A Lens - FujiFilm X-S10 Manual Básico

First Steps

Complete the steps below to ready the camera for use.

Attaching the Shoulder Strap

Attach the strap to the two strap clips as shown below.

Attaching a Lens

The camera can be used with lenses for the FUJIFILM X-mount.
Remove the body cap from the camera
and the rear cap from the lens. Place
the lens on mount, keeping the marks
on the lens and camera aligned ( A ),
and then rotate the lens until it clicks
into place ( B ).
Removing Lenses
To remove the lens, turn the camera off , then
press the lens release button (
lens as shown ( B
O
To prevent dust accumulating on the lens
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
9
A ) and rotate the
).
ENGLISH