LUTEC 9706201361 Manual Del Usario página 5

Control and adjust all your lights
from the smart switch
Device configuration: Press for 10s to reset it in APP, the indicator light
will start to flash. The smart switch is ready for configuration.
Click to turn the light on/o .
Double click to switch mode:
cool white/neutral white/warm white/color light (Default: purple light)
Rotate to change the brightness.
Press and rotate to change color temperature
white light mode: adjust color temperature
color light mode: change color
Function Buttons A/B/C
1. Add to the group: Once the light turns, long press one of the function buttons,
then the corresponding indicator light starts to flash. When the light flashes
twice, that means it is automatically added to this group. The indicator light
turns on for 3s and then goes out.
2. Connect the device: Short press one of the function buttons, the indicator light
turns on which means the corresponding group has been selected. When you
adjust the rotary knob to adjust the light e ect, and the indicator light will flash.
3. Disconnect the device: After power o and restart the device, double click the
corresponding function button, and then the device will start to flash few times
which means it has been deleted from the current group.
A B C
EN
5