The device may only be installed and
maintained by a qualified professional.
The responsibility for the correct use of
the device lies with the end-user. The
manufacturer cannot be held responsible
for any (consequential) damage caused by
inexpert, incorrect or inadvisable use.
Do not get the device wet. Do not install it
in a damp place.
2.1 Intended use of the device
■ The CO
Sensor measures the amount of
2
CO
in the air of the room in which this
2
sensor is installed. The device sends the
results to the ventilation system.
2.2 Inexpert use of the device
Do not open the casing. The installer
makes sure that all parts that can cause
personal injury are behind the casing.
18 - EN
■ The ventilation rate can be adjusted
manually. Please follow the instructions in
this user guide.
■ The brightness of the LEDs can be
adjusted manually. Please follow the
instructions in this user guide.