Vacuum Cleaner Description; Labels; Optional Kits; Accessories - Blastrac BDC-33-230V-P Manual De Instrucciones

Operating manual BDC-33-230V-P

Vacuum cleaner description

Labels

1. Identification plate
Code of the model which includes technical
specifications, serial number, year of manufacture
2. Suction connecting hose
3. Control panel
4. Vacuuming unit
5. Filtering chamber
6. Outlet
7.
Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
8.
Inlet
9. On/off switch
10. Band latch
11. Filter cartridge cleaning compressor
12. Hot surface warning plates
They warn against the danger of being burnt because of
the high temperature reached by the indicated surfaces.
13. Powered electrical equipment warning plate
It signals the presence of powered electrical equipment.
14. Silica Dust Warning
Draws the operator's attention to the fact that exposure
of a crystalline silicon ust can cause cancer or silicosis.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (10) and blows out through the outlet (7).
After the hose and tools have been fitted, make sure that the
motor turns correctly.
Before turning the vacuum cleaner on, fit the suction hose
into the inlet and then fit the required tool on to the end
part. Refer to the manufacturer's accessory catalogue or
US
Service Centre in order to choose the accessory to be used.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with filters which
enable it to be used for the majority of applications.

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
Use only supplied and authorised genuine spare
parts.
Figure 1
WARNING!

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorised by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Figure 2
A
Model
in
BDC-33-230V-P
66,9

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
Setting to work - connection to the
power supply
WARNING!
■ Make sure there is no evident sign of damage
to the vacuum cleaner before starting work.
■ Before plugging the vacuum cleaner into the
electrical mains, make sure the voltage rating
indicated on the data plate corresponds to that
of the electrical mains.
■ Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
Make sure that the vacuum cleaner is turned
off.
■ The plugs and connectors of the connection
cables must be protected against splashes of
water.
■ Check that for proper connection to the
electrical mains.
■ Use the vacuum cleaners only when the cables
that connect to the electrical mains are in
perfect condition (damaged cables could lead
to electric shocks!).
■ Regularly check there are no signs of damage,
excessive wear, cracks or ageing on the electric
cable.
www.blastrac.com ‒ info@blastrac.com
4/14
B C
Lb
in in
53,15 27,56 476