Nostalgia Electrics Vintage CCP200 Instrucciones Y Recetas página 10

All manuals and user guides at all-guides.com
Assembly of Wheels
1. Insert Axle Rod (F) into Base Support (I).
2. Put on #5 Flat Washer. Slide Wheel (G) into Axle Rod (F)
and add a second #5 Flat Washer.
3. Use the end of Wrench (H2) with small notch to hold the Axle Rod notch in place.
While holding Axle Rod (F) in place, tighten the #6 Nut Cap with Wrench (H1).
4. Add #5 Flat Washer, second Wheel (G), another #5 Flat Washer, and #6 Nut
Cap to the other side of the Axle Rod (F), following the directions above.
(#5)
Flat
Washer
(#6)
Nut
Cap
(F)
Axle
Rod
(I)
(G) Base
Wheel
Support
8