BGS technic 8759 Manual De Instrucciones página 2

Idiomas disponibles

TOOLS

Sealing ring extractor, for diameter 35 - 44 mm, with 31.5 mm center bore

Sealing ring extractor, for diameter 59 - 64 mm, with 54.5 mm center bore

Thrust bolt, is needed for non-stickouts shafts

INTENDED USE

This set of tools is used for disassembly of radial seals and is particularly suitable for sealing rings, in

which disassembly by protruding stub shaft without this tool is almost impossible. The extractor tools

grip the sealing ring from the inside with a conical profile and are suitable for most commercially

available sealing rings.

SAFETY INFORMATIONS

1. Do not use the tool if parts are missing or damaged.

2. Use the tool for the intended purpose only.

3. Never place the tool on the vehicle battery. There is a risk of a short circuit.

4. Be careful when working with the engine running. Loose clothing, tools and other objects can be

caught by rotating parts and cause serious injury.

5. Keep children and other unauthorized persons away from the work area.

6. Do not allow children to play with the tool or its packaging.

7. Be careful when working on hot engines because of the risk of burn injuries.

8. If you remove the ignition key before repairing, you can prevent the engine from being started

accidentally and resulting in engine damage and personal injury.

9. This manual serves as a brief guide and does not replace a workshop manual. Always refer to

the vehicle-specific service literature, particularly the technical data such as torque values and

instructions for disassembly/assembly, etc.

USE

1. Lubricate threaded head (A) of oil seal extractor.

2. Place the seal extractor in position and exerting firm

pressure screw it as far as possible into oil seal.

3. Loosen the screw (B).

4. Turn inner part (C) against crankshaft until the oil seal

is pulled out.

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Radial Seal Ring Extractor Tool Set

for Crank- & Camshafts

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

BGS 8759

www.bgstechnic.com