Vacuum Function - Pur Line HAVC-02 Manual De Instrucciones

· In order to protect children from electric household appliances, make sure that the cable can't cause children to
stumble and don't give children access to the appliance.
· Check the appliance and the power cord regularly for any possible damage. Don't use damaged appliances.
· Don't try to repair the appliance yourself. Always use an authorized technician for repairs.
· Only use original spare parts and accessories.
· Only store the appliance in a safe and dry location outside the reach of children.
SPECIAL SAFETY STANDARDS:
· Do NOT vacuum hazardous substances.
· Only vacuum up the ash of permitted fuels!
· Do not vacuum up hot or burning objects or embers (e.g. cigarettes, charcoal, ashes, etc.). The temperature of the
material must be below 50 °C.
· Attention! Material that appears to have cooled down from the outside may still be very hot inside. Hot ash particles
may ignite again in the airflow. Temperatures exceeding 50°C may damage the vacuum cleaner, the hoses and the
ash filter.
· Wait until the fire or the ash has cooled down before you begin cleaning. It is not recommended to quickly extinguish
the fire with water. The components in the chimney cannot withstand the sudden variations in temperature and
cracks may result.
· Please make sure that the oven is cold before you vacuum clean ovens.
· Continuously check tubes, ash filter and vacuum cleaner for excessive temperatures during the vacuum cleaning.
If you notice a temperature rise, switch off the vacuum cleaner immediately. Disconnect the vacuum cleaner from
the mains and remove the filter bag. Remove the material from the ash filter. Let the appliance cool down under
supervision.
· In case of excessive temperatures, the tubes, the ash bag, or the vacuum cleaner may be damaged.
· Completely empty the vacuum cleaner and the ash filter in a safe area after vacuuming.
USE
ASSEMBLY
· Take out the vacuum cleaner and the accessories from the packaging.
· Release the metal clamps and lift the cover.
· Fit the washable filter on the bottom of motor base . The filter should be took out and brush dust after use.
· Close the container by placing the cover back and closing the metal clamps.
· Connect tightly connectors and suction tube with two ends of flexible hose.
2
1

VACUUM FUNCTION

· Place the equipment on a level surface that is not heat sensitive.
· Connect the vacuum cleaner to the mains.
· Press the ON/OFF switch.
!
CAUTION: RISK OF FIRE if the temperature of the material exceeds 50°C.
All manuals and user guides at all-guides.com
ATTENTION: Before you start the appliance,
!
make sure that the filter is in the position.
5