MyFridge MF05M, MF1M
6
Operation
A
NOTICE!
When using the milk cooler, also see the instructions in the customer docu-
mentation of your coffee maker.
Only use the milk glass supplied for cooling milk. Replacement glasses can
be ordered stating item number T0 63 (MF-05M) or T0 82 (MF-1M).
I
NOTE
Before starting your new device for the first time, you should clean it inside
and outside with a damp cloth for hygienic reasons (please also refer to the
chapter "Cleaning and maintenance" on page 13).
If the device malfunctions (e.g. due to electrostatic discharge) you only need
to press a function button for the device to function normally again.
6.1
Cooling milk
➤ Fill the glass with milk and screw the lid with the milk tube onto the glass.
➤ Place the milk glass in the cooler.
➤ Connect the milk tube on the cooler to the supply line of your coffee maker.
➤ Connect the appliance via the mains adapter to a power source and press the
"ON/OFF" button (fig. 2 A1, page 3).
✓ The status indicator (fig. 2 A2, page 3) lights up and the device starts cooling.
➤ To end cooling. press the "ON/OFF" button (fig. 2 A1, page 3).
➤ To switch off the device, pull out the connecting cable.
7
Cleaning and maintenance
A
NOTICE!
Before cleaning the device, pull the cable out of the socket.
Also see the cleaning instructions in the customer documentation of your
coffee maker.
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the device.
I
NOTE
The milk glass (without the lid) is suitable for dishwashers.
➤ Clean the inside of the device with a damp cloth now and again.
➤ Wipe the outside with a damp cloth.
➤ Clean the lid and the milk tube occasionally with a standard cappuccino cleaner.
EN
Operation
13