Korenix JetPort 5801 Manual Del Usuario página 4

All manuals and user guides at all-guides.com
3.4 Go to "Networking" -> "Wireless" to assign the network parameters.
3.5 Unplug the LAN interface or power reboot the JetPort 5801 to activate the WLAN
connection. Run step 3.1 to find the JetPort 5801 through the WLAN connection.
4. Configuring the serial port:
4.1 Go to "Configuration", and choose the "device" and the "port". Select "Serial Settings" to
configure the serial parameters.
4.2 Select "Service mode" and "map" the port to the COM port if you select "Virtual COM"
mode.
Congratulations! You have finished JetPort configurations. You can also use web or telnet
console by the JetPort IP address.