WOODLAND SCENICS JUST PLUG Guia De Inicio Rapido

JUST PLUG
INSTRUCTIONS
BEFORE YOU PROCEED
The Auxiliary Switch should ONLY be plugged into the CTRL Port. Before you begin,
read through instruction booklet entirely. Comply with all operating instructions. Failure to
follow instructions could result in damage to the product or personal injury. Do not modify
or tamper with any electronic components. Combine products from the Just Plug Lighting
System only, unless otherwise instructed. Save these instructions.
AUXILIARY SWITCH
The Auxiliary Switch is an ON/OFF switch designed to control a single Hub or multiple Hubs.
Use multiple Auxiliary Switches to light your layout, neighborhood by neighborhood.
CTRL Port
Light Hubs (JP5700, JP5701), Sequencing Light Hubs (JP5680) and Expansion Hubs
(JP5702) have a CTRL Port with preinstalled CTRL Port Plug (Fig. 1). The CTRL Port
"controls" the HUB Ports on Expansion Hubs and the LIGHT Ports on Light Hubs and
Sequencing Light Hubs. When an Auxiliary Switch is installed into the CTRL Port, the Hub
becomes a switched Hub. NOTE: The CTRL Port does not affect the Power Out Port on
Expansion Hubs.
Control multiple Hubs with a switched Expansion Hub (Figs. 4, 5 and 6).
Main St.
Aux.1
Main St.
Aux.1
Aux.1
Aux.1
Fig. 1
CTRL Port Plug
Light Ports
Fig. 2
Auxiliary Switch
Locking
Tabs
CTRL Port
WOODLAND SCENICS
®
AUXILIARY SWITCH JP5725
Fig. 3
Auxiliary
Switch 1
Fig. 4
Hub Ports
Hub 1
Main St.
Aux.2
Auxiliary
Switch 2
Fig. 6
Model making product. Not a toy! Not suitable for children under 14 years! / Produit pour le modélisme. Pas un
jouet! Pas adapté aux enfants de moins de 14 ans! / Producto para modelismo. No es un juguete! No adecuado
para niños menores de 14 años! / Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
RoHS Compliant
WOODLAND
Manufactured by
®
LIGHTING SYSTEM
Installing Auxiliary Switch
• Remove CTRL Port Plug from CTRL Port on Light Hub, Sequencing Light Hub or
Expansion Hub (Fig. 1). To remove, grasp top edge of Plug and pull firmly.
• Align locking tabs on Auxiliary Switch Plug with front of Hub (Fig. 2). Insert Plug into
CTRL Port until locking tabs click into place. NOTE: DO NOT plug the Auxiliary Switch
into any other port.
• Label front of Auxiliary Switch according to your lighting configuration. For example,
Auxiliary Switch 1 controls the lights on Main Street on your layout (Fig. 3).
• Mount Auxiliary Switch in desired location with included Tape or Screws.
BASIC SWITCHED HUB CONFIGURATIONS
Single Auxiliary Switch with Single Light Hub or Sequencing Light Hub (Fig. 3)
All lights are switched ON/OFF by the Auxiliary Switch.
Single Auxiliary Switch with Single Expansion Hub (Fig. 4)
All lights on Hubs 1, 2, 3 and 4 are switched ON/OFF by the Auxiliary Switch.
Single Auxiliary Switch with Multiple Expansion Hubs (Fig. 5)
All lights on Hubs 1-7 are switched ON/OFF by the Auxiliary Switch.
Multiple Auxiliary Switches with Single Expansion Hub (Fig. 6)
Auxiliary Switch 1 switches all Hubs ON/OFF.
When Auxiliary Switch 1 is turned ON, Auxiliary Switch 2 switches Hub 1 OFF/ON
independently from Hubs 2, 3 and 4.
1a 1b 1c 1d
1
Hub 1 Hub 2
Auxiliary
Switch
Power
Supply
1a 1b 1c 1d 2a 2b 2c 2d
1 2
Hub 2 Hub 3
Power
Auxiliary
Supply
Main St.
Aux.1
Switch
1a 1b 1c 1d
Aux.2
1
Hub 1
Power
Supply
Auxiliary
Switch 1
® • PO BOX 98, LINN CREEK, MO 65052 • N9 • woodlandscenics.com
1a 1b 1c 1d
1
2a 2b 2c 2d 3a 3b 3c 3d
3
2
Hub 3
1
Aux.1
Marceline
Aux.1
3a 3b 3c 3d 4a 4b 4c 4d
3 4
Hub 4 Hub 5
Expansion Hub 1
1 2 3 B
Aux.1
1
Expansion Hub 2
2a 2b 2c 2d 3a 3b 3c 3d
2
Hub 2 Hub 3
Marceline
Aux.1
2a 2b 2c 2d
2
4a 4b 4c 4d
4
Hub 4
Expansion Hub
2 3 4
1
Marceline
Aux.1
5a 5b 5c 5d 6a 6b 6c 6d
5 6
Hub 6 Hub 7
5 6 7
4
2
Fig. 5
4a 4b 4c 4d
3 4
Hub 4
1 2 3 4
Aux.1
Expansion
1
Hub
7a 7b 7c 7d
7