Remote Control - Philips LivingColors Generation2 69175 Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
o Link the remote to the LivingColors by
following the procedure described in section
3.1 of this manual.
o
Buttons are flashing after I have used the

remote control

o This means that the batteries in the remote
control are (almost) empty and need to be
replaced.
I cannot start the automatic colour-
o
changing mode
o It could be that the remote control did not
understand your "sweep" movement. Please
try again, making sure that your finger is
on the colour wheel during the full circle
movement
o
I would like to connect the LivingColors
to a timer. Is this possible?
o Yes. You can use Philips LivingColors with a
timer (not included). When switched on with
a timer, the LivingColors will show your last
setting (static colour or automatic colour-
changing mode). Please make sure that your
last setting is not "off".
o
I cannot connect additional lamps to the
LivingColors remote control
o Please make sure that the product you are
trying to connect has a SmartLink logo on it.
Only products with a SmartLink logo can be
connected to this remote control.
o Try repeating the procedure described in
section 3 of this manual. Make sure you
do hear the sounds and see the flashes as
described there.
o
My question is not listed here
o Please contact Philips for assistance (see
section 5 "Additional support").
5.
Additional support
For information and in the event of any problem,
please visit the Philips website at
or contact the Philips Lighting Contact Centre free
of charge in the U.S.: 00800-PHILIPSL or 00800-
74454775
Warranty:
The Philips two-year warranty is valid if the product
is used in accordance with the instructions and for
its intended purpose. Claims will only be accepted on
submission of the original proof of purchase (invoice,
sales slip or receipt) stating the purchase date, the
name of the dealer and a description of the product.
www.philips.com
The Philips warranty lapses if:
- Anything has been changed, crossed out, deleted
or rendered illegible on the purchase docket or
product description.
- The failure is caused by damage, faulty connections
or abuse.
- A defect is caused by extreme circumstances not
inherent to the LivingColors, for example, lightning,
flooding, fire, incorrect use or negligence.
- The LivingColors has been opened or disassembled.
Cleaning and maintenance:
Remove the plug from the wall socket.
To avoid scratching, the LivingColors lamp, remote
control and adapter should only be cleaned with a
soft dry cloth.
Do not use cleaning agents.
Safety instructions:
- Keep the plug and LivingColors away from liquids
and humidity.
- LivingColors is for indoor use only. Do not use in
wet locations, e.g. bathrooms or outdoors.
- LivingColors is not a toy designed to be played with
by children.
- Do not place on hot surfaces
- For safety reasons and under the terms of the
warranty, the LivingColors and plug must not be
opened.
- Only use the adapter supplied: using a different
adapter can damage your LivingColors.
Environment:
If you discard the appliance in due course, dispose
of it in accordance with the instructions of the local
authority. Remove the batteries when you discard
the remote control. Do not throw the batteries away
with normal household waste. They must be handed
in at an official collection point or at a Philips Dealer,
both of which will dispose of the batteries in an
environmentally friendly way.
Plug specification:
AC adapter
Model:
EADP-10EB C (EU type)
EADP-10EB D (UK type +
Singapore)
EADP-10EB E (Australia type)
Input:
220–240 V ~ 0.3 A 50 Hz
Output: 18.5 V
Power consumption of the luminaire: up to 15.4 W
Remote Control:
Batteries: 3 x Philips Powerlife Alkaline AAA LR03, 1.5
V.
21
0.83 A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Livingcolors generation2 69176 serieLivingcolors generation2 69176/48/phLivingcolors generation2 69175/48/ph

Tabla de contenido