Powerbuilt 648642 Guia De Inicio Rapido página 2

Wheel Bearing Locknut Set
Includes 7 specialty sockets used to service wheel bearing locknuts found on many Ford, Dodge and Toyota trucks and SUVs. Standard hex sockets as well as
sockets for nuts with rounded edges are included. Kit contains 2 9/16" rounded hex, 2 1/2" regular hex, 2 3/4" rounded hex, 55mm regular hex, 2 3/8" rounded
hex, 2 1/2" rounded hex and 2 3/8" regular hex. Sockets are 1/2" square drive and can be turned with a ratchet, breaker bar or a torque wrench. Slide-lock stor-
age case has individually fitted and labeled compartments for each socket.
Far Left Slot, Top Row
• 2 9/16" rounded hex (6R) locknut socket. This special socket is designed remove and install locknut sockets found on 1990 through 1993 Dodge trucks
equipped with Dana 60 manual hubs.
Second Slot, Top Row
• 2 1/2" regular hex locknut socket (2 1/2" 6PT). This special socket is designed remove and install various locknuts found on the rear axles of a variety of
light-duty trucks. Some front axle applications may be serviced with this socket as well.
Third Slot, Top Row
• 2 3/4" rounded hex (2 3/4" 6R) locknut socket. This special socket is designed to remove and install locknuts found on Ford F-250 & F-350 pickup trucks
rated at 3/4 & 1 Ton, when equipped with manual locking hubs.
Far Left Slot, Bottom Row
• 55mm regular hex locknut socket (55mm 6PT). This special socket is designed to remove and install front wheel bearing adjusting lock nuts found on Toyota
Land Cruiser & Pickup Trucks.
Second Slot, Bottom Row
• 2 3/8" rounded hex locknut socket (2 3/8" 6R). This special socket is designed to remove and install locknuts found on 1990 to current Ford Ranger and
Explorer models with automatic locking hubs, as well as Ford Bronco II models with automatic locking hubs.
Third Slot, Bottom Row
• 2 1/2" rounded hex locknut socket (2 1/2" 6R). This special socket is designed to remove and install locknuts found on 1995-96 Ford Bronco and Ford F-150
pickup trucks with automatic locking hubs.
Fourth Slot, Bottom Row
• 2 3/8" regular hex locknut socket (2 3/8" 6PT). This special socket is designed remove and install various locknuts found on 1984 through 1992 Ford Ranger
and Bronco II with automatic locking hubs.
1