CRC SmartWasher SW-23 Manual De Instrucciones página 32

ISSUE REMEDIAL ACTION
Excessive fluid With "normal usage" you should have to add a 20 liter container of OzzyJuice
loss every 6 to 8 weeks. "Normal usage" means the equivalent of several users in a 10 hour day
in a standard maintenance, repair and operation facility or several users in a multiple bay
garage facility.
a) Check the fluid temperature. If the temperature is above 49°C the probe is not working
b) Examine closely where the sink and base meet. Are there any gaps? Is the base bowed? Is
Is the SmartWasher
Make sure the nozzle and brush are flowing into the sink.
If the fluid is leaking from the body of the base?
The base will need to be replaced.
If none of the previous applies, this rules out any problem with the SmartWasher
Make sure you and your co-workers are aware that certain practices can cause you to use
excessive amounts of OzzyJuice
Low or no flu- Make sure that the valves at the base of the nozzle and brush are open.
id from brush/ If a stronger flow through either device is needed, turn the valve on the unused tool to the
nozzle closed position
Hoses from the pump to the nozzle and brush could be clogged, pinched or disconnected.
Check the hoses from the pump to the nozzle making sure they are in working order.
Make sure that the SmartWasher
Hose connections should be secure and not leaking
The pump becomes with a one year factory warranty. If the pump is faulty, contact your local
CRC distributor to order your warranty replacement (if applicable). Have the serial number
of the SmartWasher
SmartWasher
BIOREMEDIATING parts washing system
USER INSTRUCTION MANUAL
properly. Temperatures above 49°C will increase the rate of evaporation.
the sink warped? The SmartWasher operates as a closed system; any gaps will provide
space for air to enter and condensation to escape.
"leaking"? Where is it "leaking" from?
®
unit available when calling.
®
ORIGINAL INSTRUCTIONS
.
®
is not low on fluid
®
®
approximately
®
itself.
®
page 32 of 720