Getting Started; Installing Backup Batteries - Clarity XL50 Guia Del Usuario

1
2
Figure 1
14
All manuals and user guides at all-guides.com

GETTING STARTED

There are five initial steps involved in setting up
your XL50
1. Insert four AA alkaline batteries for back-up in case of
AC power outage. See below.
2. Decide if you want the phone to sit on a desk or hang
on the wall.
3. Connect the telephone components. Pages 15-16.
4. Program up to eleven (11) telephone numbers to call
with the press of a memory button. See Page 18.
5. Set up Notification Options. See Page 20.
Installing the Backup Batteries
If there is a power outage, the XL50 will operate for up
to 48 hours with four AA alkaline backup batteries (not
included). If the phone is not in use, the batteries will stay
charge for several months. See Figure 1.
To install new batteries:
1. Slide open the battery compartment cover on the
bottom of the telephone. To open the battery
compartment, use a pen or similar fine point instru-
ment to press into small opening below the compart
ment door. This opening is pointed out with the #2
in Figure 1.
2. Install four fresh batteries. Be sure to observe battery
polarity as imprinted on the base of the compartment.
The battery indicator on the top panel will light up if
the batteries are running low.
The phone operates as a regular phone if there is no
power or battery. Certain functions of the phone do
require power however. If no power is being supplied to
the phone, it will have no indicator lights, the loud ringer
will be disabled, there will be no amplification, and the
lighted keypad will not be lit.