Led Indicator - Marshall MINOR III Manual Del Usuario

ENGLISH
GETTING STARTED
1. Open the charging case.
2. Press and hold the button on the bottom of the case until the
LED turns to a slow blue pulse.
3. Select MINOR III from your sound device's Bluetooth
TOUCH CONTROLS
Touch the left or right earbud to control your music and phone calls.
• 1 touch to play/pause or receive/end a call
• 2 touches to skip forward or reject a call
• 3 touches to skip backward
CHARGING THE EARBUDS
Put your earbuds back in the case and close the lid to turn them off and
begin charging.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge
it. The case is fully charged when the front-facing LED is steady green.
To charge the case using a wireless charger, follow the instructions below.
1. Place the charging case with its back flat against the wireless
charging pad.
2. Make sure that the front LED lights up to indicate that the case is charging.
3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR

The LED shows the case battery charge, from red through yellow to
green (0–100%). It pulses blue while in Bluetooth pairing mode.
PAIRING A NEW DEVICE
Minor III remembers up to 6 previously paired devices and will try to
reconnect with the last connected device.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the button on the bottom of the case until the LED
turns to a slow blue pulse.
3. Select MINOR III from your sound device's Bluetooth list.
list.
®
Note: Minor III can be connected with one sound device at a time. Make
sure to disconnect from the current device before reconnecting with a
different device.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, follow the instructions below.
1. Place the earbuds in the case and close the lid to restart the earbuds.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 10 seconds, until
the LED turns purple, to reset the earbuds to factory settings.
3. Remove MINOR III from your sound device's Bluetooth list before
pairing again.
If the problem persists, perform a hardware reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 15 seconds to reset
the earbuds.
3. Remove MINOR III from your sound device's Bluetooth list before
pairing again.
003