- Do not turn off the switch located upstream of the shower
enclosure until the final washing cycle for the steam genera-
tor has stopped.
- During the Turkish bath, it is possible to use the manual hydraulic
functions (shower, showerhead and/or spray jets); the audio system
and the Cromodream® function can also be activated (the alarm is
always available).
Scale removal cycle
T
o resolve problems caused by the formation of scale in the steam
generator, the shower unit comes equipped with a function,
that, thanks to the action of a specific product, makes it possible to
remove any incrustations.
To guarantee complete cleaning of the steam genera-
tor, you must carry out the scale removal cycle after
20-25 "Turkish bath" functions.
The cycle lasts approx. 10 hours: during this period, the various
functions are available (except the Turkish bath).
Make sure that the waterfall, the whirlpool jets and/or the
Turkish bath are not active; also make sure that the control panel
is in the "awaiting instructions" mode (refer to the "Activating
the electronic functions" chapter).
Prepare the scale removal liquid by pouring the scale removal
product (contained in the supplied bottle) into approx. 3/4 litres
of water; mix it all together so that it blends well.
TOP model
Press the "Turkish bath" key, the following configuration will ap-
pear on the display:
If a few seconds pass without pressing any key, the control
panel will return to the "awaiting instructions" mode and then
"stand-by": press the "on/off" key to reactivate the control panel
and then the "Turkish bath" key to activate the desired function.
Press the ">" key to select the "water-pitcher" symbol (outline
on a white background).
The first number under the symbol indicates the number of
"Turkish baths" carried out (10, in this case) whereas the second in-
dicates the maximum number of "Turkish baths" possible before the
function is inhibited and a scale removal cycle must be activated.
Then press the "on/off" key to activate the function: the
"Turkish bath" key starts to flash and the display shows the
countdown of the remaining amount of time for pouring the
scale removal liquid.
62
10/30
10/30