CLEANING
• All removable parts (A, B, C, D, G and L) may be cleaned in the
dishwasher, except for the juice collector (E). The juice collector (E) must
be cleaned straight after use in soapy water.
• This appliance is easier to clean immediately after use.
• Do not use abrasive sponge, acetone, alcohol (white spirit), etc. to clean
the appliance.
• Use the cleaning brush (M) for the sieve.
• The sieve must be handled with care. Avoid any mishandling that may
affect the performance of the appliance.
NOTE: You MUST replace your sieve at the first sign of wear or damage.
• Clean the motor unit with a damp cloth. Dry carefully.
• Never immerse the motor unit under water or any other liquid.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
PROBLEMS
The appliance does not
work.
The appliance is giving off a
smell or is very hot to touch,
is making an abnormal
noise or smoking.
The flow of juice decreases.
For any other problem or fault, please contact your approved Service centre.
All manuals and user guides at all-guides.com
CAUSES
The plug is not inserted
correctly; the control knob
(I) is neither on "1" nor
on "2".
The cover (C) is not properly
secured.
The sieve (D) is not properly
fitted.
The quantity of fruit or
vegetables being processed
is too great.
The sieve (D) is blocked.
SOLUTIONS
Plug the appliance into
a socket with the correct
voltage. Turn the control
knob to speed "1" or "2".
Check that the cover (C)
is properly secured by
the safety clamp (H) and
positioned correctly in the
grooves.
Check that the sieve (D)
is fitted properly onto the
drive shaft (J).
Allow the appliance to
cool down and reduce
the amount of fruit or
vegetables being processed.
Turn off the appliance,
clean the feed tube (B) and
the sieve (D).
EN
59