Taurus ROBOT VAPORE Manual De Instrucciones página 10

English
Food processor
Robot Vapore
Dear customer,
Many thanks for choosing to purchase a TAURUS brand product.
Thanks to its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life can be
assured.
Description
A Water tank lid
B Water tank
C Switch
D Pilot light
E Safety switch
F Steam seal
G Container lid
H Goblet
I Cooking basket
J Cooking tray
K Cooking basket handle
L Blades
M Fastening nut for blades
N Blades seal
O Spatula
P Cable housing
* Do not put food at temperatures higher than 100ºC
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance and
keep them for future reference. Failure
to follow and observe these instructions
may result in an accident.
- Clean all the parts of the product that
will be in contact with food, as indicated
in the cleaning section, before use.
- This appliance is only for domestic
use, not for industrial or professional
use. It is not intended to be used by
guests in hospitality environments such
as bed and breakfast, hotels, motels,
and other types of residential environ-
ments, even in farm houses, areas of
the kitchen staff in shops, offices and
other work environments.
- This appliance must not be used by
children. Keep this appliance and its
plug out of children's reach.
- This appliance can be used by people
unused to its handling, disabled people
Manual Robot Vapore.indb 10
All manuals and user guides at all-guides.com
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and unders-
tand the hazards involved.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- The blades are sharp and people
may be at risk of getting cut. Be careful
and avoid direct contact with the edge
of the blade.
- Pay special attention when handling
the blades, assembling and disassem-
bling, removing contents of the contai-
ner and cleaning.
- Always disconnect the appliance from
the power supply if left unattended and
before assembling, disassembling or
cleaning.
- Disconnect the appliance and unplug
from power supply before changing
accessories or nearest parts that move
when in use.
CAUTION: To avoid hazards due to
unwanted reset thermal protector,
the appliance must not be powered
through an external switching device,
such as a programmer, or be connec-
ted to a circuit that regularly switches
on and off through the company power
distribution.
- In order to avoid a hazard due to
unwanted reset thermal protector, you
have to feed the machine through an
external switching device, such as a
programmer, or connect it to a circuit
that regularly switch on and off through
20/12/13 13:47