Next Level Racing WS 2.0 Manual De Instrucciones página 12

support@nextlevelracing.com
13
Line up the holes on the Shifter Mounting Arm with the threaded inserts on the vertical post choose
your desired height securing with 2x M8 16mm Bolts and Washers.
14
Install the Feet into the threaded inserts at the bottom of the stand. Rotate the feet clockwise to
tighten.
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 4 x Feet