Using The Display - Sony SCD-XE597 Manual De Instrucciones

To select the default playback
area
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until "M/2ch
SEL" appears in the display.
3
Press l AMS L (or ENTER on the
remote).
The current default area appears.
4
Turn l AMS L (or press ./>
on the remote) to select the desired
playback area.
5
Press l AMS L (or ENTER on the
remote).
Note
The multi-channel playback area is automatically
selected whenever you start playback because "SEL–
Mch" (multi-channel playback area) is the factory
setting. Select "SEL– 2ch" (2 channel playback area)
when only the ANALOG 5.1CH OUT FRONT L/R
jacks are connected.
GB
10

Using the Display

The display window shows various information
about the disc or track being played. This section
describes the current disc information and
information that appears for each play status.
Disc information when a disc
is loaded
The display shows the total number of tracks and
total playing time.
E
A: Hybrid disc
B: Currently loaded disc and number of playable
channels
C: Track 16 and above (for discs with 16 or more
tracks)
D: Total playing time
E: Total number of tracks
A B
D C