Irc-6 (Infrared Remote Control 6) Operation - Chauvet DJ Beamer 6 FX Manual Del Usuario

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product. In DMX mode the IR will not function.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Page 24 of 112
All manuals and user guides at all-guides.com
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press <AUTO> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Laser/Strobe Only
o
<1> Laser/Strobe/Beam
o
<2> Beam Only
o
<3> Beam Only
o
<4> Laser Only
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Laser/Strobe Only
o
<1> Laser/Strobe/Beam
o
<2> Beam Only
o
<3> Beam Only
o
<4> Laser Only
o
Speed Adjust
To adjust the speed of the auto program:
·
Press <SPEED> on the IRC-6.
·
Press <+> or <–> to increase or decrease, Auto program speed respectively.
Beam Head Color Modes
To set a specific color output for the Beam effects:
·
Press <R> for red.
·
Press <G> for green.
·
Press <B> for blue.
·
Press <W> for white.
Miscellaneous Operation
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
<5> Laser Only
o
<6> Strobe Only
o
<7> Strobe Only
o
<8> Beam/Laser Only
o
<9> Beam/Strobe Only
o
<5> Laser Only
o
<6> Strobe Only
o
<7> Strobe Only
o
<8> Beam/Laser Only
o
<9> Beam/Strobe Only
o
Beamer 6 FX User Manual Rev. 3