Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
USING THE SPEAKERPHONE
To use your Bluetooth speaker as a speakerphone for receiving a phone call from a
Bluetooth enabled phone.
1. Follow the "PAIRING YOUR BLUETOOTH DEVICE" section to set up the
Bluetooth connection.
2. When a call is received during music is playing, music will be muted to hear the
ringtone. STATUS indicator will flash in RED color to indicating the incoming
call. Press the "ANSWER" button to answer the call, or press the "
ignore the call.
NOTE: The voice from the unit will be in "MONO" mode when the Speaker
phone is being used and only the right hand side speaker will sound.
3. Use the Volume+/- buttons to adjust the desired volume level.
4. When the call is completed, press the "END" button to end the call and resume
previous function or music playback.
NOTE:
The position of the built-in microphone of the unit is on the central of the front side.
You are recommended to face the front side of the unit and at a short distance in order
to have good voice quality and clarity.
USING THE AUX IN JACK
1. Plug one end of the AUX IN cable (not included) into the headphone jack (or
audio out) of your audio device and the other end into the AUX IN jack of the
unit.
2. Press and hold the "
blue light appears).
3. Use your audio device to control music playback and volume through the unit.
4. Use the Volume+/- buttons to adjust the desired volume level.
5. When done listening, press and hold the "
the unit off (switch to standby mode) and unplug the AUX IN cable from the unit.
Remember to turn off your audio device too.
All manuals and user guides at all-guides.com
" button for 2 seconds to turn on the unit (release when
" button for 2 seconds to turn
10
" button to
Publicidad
