Polaroid PLAY Smart Guia De Inicio Rapido página 3

5
Place the filament
onto the Precise
Filament Holder &
Scale and switch it on.
7
Remove any residue of filament from the nozzle
before you start printing.
9
Download or design your model (.STL) and then
slice using the Polaroid SmartPrep Software
(www.polaroid3d.com/software). Save to SD card
or USB and then print from the printer.
Twist around
until it breaks
Twist off 5cm of filament as
shown above.
Top of filament should NOT be
angled.
Keep filament straight when
loading.
Gcode files
PTFE Tube
Squeeze
together
Filament
(2cm)
Squeeze
together
Insert lament
6
Slightly squeeze the levers on the side of the
extruder together and slide the filament up from the
bottom until approx. 2cm is visible in the PTFE tube.
Press 'Filament', then 'Load' on the LCD screen.
Polaroid PlaySmart
3D Printer
8
Download the Polaroid
PlaySmart App to print
remotely, and then
connect your printer:
10
Insert your SD card or USB and go to 'New Print'
to start your print.
Load
Filament
1
Setting
3
2 Pair the
Printer
Setting
Pair the Scan
Printer QR-code
3