English - BTI PROFILINE KLL 20 Instrucciones De Operación

All manuals and user guides at all-guides.com
E N G L I S H
CROSSLINE LASER
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the
most reliable partners for professional power tool users.
Technical data
Art. No
Voltage
Battery size
Laser power
Laser class
Wavelength
Protection class
Self-leveling range
Operating temperature
Receptacle thread
Weight
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance
of the instructions in this manual.
Fire hazard.
EC-Declaration of conformity
BTI-KLL 20
BTI declares that these power tools have been designed
in compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC,
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 60825-1 & EN 61010-1.
For more information, please contact BTI at the address
below, or refer to the back of the manual.
ppa. U. Delz
BTI Befestigungstechnik GmbH & Co. KG
D-74653 Ingelfi ngen
BTI-KLL 20
007740
V 4.5
3 x LR6 (AA)
mW < 1
II
nm 630 ~ 680
IP54
° +/-4
°C -10 - +45
M6 x 20
kg 0.75
i.V. G. Hub
16
Package contents
The package contains:
1 Crossline laser
1 Wall mount
3 Batteries
1 Kitbox
1 Instruction manual
• Take the time to thoroughly read and understand this
manual prior to operation.
Description (fi g. A)
The crossline laser BTI-KLL 20 has been designed to
project laser lines to aid in professional applications.
The tool can be used indoor for horizontal (level),
vertical (plumb) and square alignment. The applications
range from layout of walls and windows to installation of
framing track.
1 On/off switch (vertical laser beam)
2 On/off switch (horizontal laser beam)
3 Low battery indicator
4 Vertical laser beam
5 Horizontal laser beam
6 Vertical laser beam indicator
7 Horizontal laser beam indicator
8 Pivot bracket
9 Wall mount
10 Battery compartment
Assembly and adjustment
Replacing batteries (fi g. B)
The attachment uses batteries of type LR6 (AA).
• Open the battery compartment cover (9).
• Replace the batteries (11). Make sure the new
batteries are placed as indicated.
• Close the battery compartment cover.
When replacing batteries, always replace the
complete set. Do not mix old batteries with new
ones. Preferably use alkaline batteries.
Low battery indicator (fi g. A)
The tool has been equipped with a low battery indicator
(3) located on the control panel. The low battery indicator
is lit while the tool is switched on.
It will blink to indicate that the batteries need to be replaced
and the tool will automatically shut down.
• Switch off the tool and remove the batteries as soon
as the indicator blinks.
BTI-KLL 20