Storage; Troubleshooting - HydroOxy 1000 Manual Del Usuario

! WARNING
Don't leave the steamer unattended during the lime scale removal process and/or while in use
NOTICE:
Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that there is no debris left in the system.
Cleaning blocked steamer accessories
Due to the high mineral content of water in some areas, you may notice that less steam comes out form the Hand-Held steamer accessories
This may be caused by calcium buildup inside the tip of the nozzle
How to cleaning calcium buildup
We recommend using a spray lubricant. Spray a small burst or two of the lubricant inside the tip of the Jet Nozzle. After spraying lubricant inside the component,
till the steamer with water according to the directions and run a continuous jet of steam through the affected accessory for several minutes to remove the deposit
once the steam pathway is clear, aim the steamer at a neutral surface or cleaning cloth to make sure no debris is emitted.
This product contains no serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly other than cleaning must be performed by a
qualified appliance repair technician.
ALL servicing should be done by an authorized service representative.
CLEANING MICROFIBER PAD
•
Machine washable on "warm" setting. Always use a mild detergent.
•
For best care results, lay flat to air dry
•
IMPORTANT：Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks.
•
IMPORTANT：Never use bleach or fabric softener when washing the microfiber cleaning pad.

STORAGE

•
After the steamer is used, turn power off and then unplug the power cord.
•
Take out the water tank, and empty the residual water in the tank and clean the external surface with a dry cloth. Until the steam mop cools down, clean
appliances.
•
Remove the cleaning pad and wash it so that it will be ready for next use.
•
Hang the power cord in the cord hold, press spindle button, and fold the holder. Then rotated cord hold 180°to prevent cord drop.
•
Store product in a protected, dry area. Keep water funnel and measuring cup for future use.
•
Keep out of reach of children.

TROUBLESHOOTING

USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING.
! WARNING: TO REDUCE RISK OF PERSONAL INJURY-UNPLUG STEAMER BEFORE SERVICING AND ALLOW TO COOL
PROBLEM
Reduced steam or no steam
Unit will not turn on
www.HydroOxy.com
All manuals and user guides at all-guides.com
POSSIBLE REASON
Water tank may be empty
Steam nozzle may be blocked
There is no power to the unit
Didn't press steam button
Steam control knob is on minimum steam release
Blown fuse or breaker
Power cord not plugged in
Internal fuse is blown
Page 10 of 39
POSSIBLE SOLUTION
Fill water into the water tank
Clean steam nozzle
Make sure unit is plugged in
Press steam button
Turn steam control knob clockwise
Replace fuse or reset breaker in home
Plug cord into a working circuit
Contact with customer service