Machine And Control Panel Components - Tennant S6 Manual Del Operario

MACHINE AND CONTROL PANEL
COMPONENTS:
The machine is equipped with a simple panel control that controls all the
operational functions of the machine.
A) On-Off main switch of the machine
B) Led indicator for battery charge
C) Display switch
D) On-Off sweeping mode switches 1 and 2
E) Manual operating switch of the filter shaker
F) Vacuum fan switch
G) Numeric display
The functions located on the control panel can be explained as follows:
A) Main switch to turn on and off the machine.
B) Led indicator for battery charge. Green for when the machine is
charged, red for when the machine is discharged and yellow for when
the machine charge is in reserve or when the machine is being charged.
C) Numeric display switch: pressing this switch, a part from seeing the
machine voltage, the display indicates the working hours of the machine
(pressing the switch once) and minutes (pressing the switch twice).
D) On-Off sweeping mode switches 1 and 2: these two switches allow
the machine to work with two separate sweeping mode: mode 1 for light
debris collection and mode 2 for heavy debris collection.
E) Manual operating switch of the filter shaker gives the possibility in
shaking the filter at any time during work. This is to be intended as an
addition to the automatic filter shaking that cycles every 3 minutes.
F) Vacuum fan: the vacuum fan automatically activates when sweeping
mode is on. Therefore the switch is used when the requirements are to
switch off the vacuum fan during sweeping mode.
G) Numeric display
L
F
E
A) CONTROL PANEL
B) CHARGER FUSE (1.25A)
C) HANDLE LOCKS
D) BUMPER
E) SIDE BRUSH
F) TOP COVER
G) WARNING LABEL
H) CHARGER CORD COMPARTMENT
I) HOPPER
J) BRUSH
K) BATTERY FUSE (20A)
L) ACTUATOR FUSE (2,5A)
EN
A
K
G
H
D
FUSE 1.25A
B
C
I
J
5