Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE (CONT.)
REMOVE THE CRUMB TRAY:
NOTE: Toaster must be completely cool and not in operation or plugged into an
electrical outlet before cleaning or removing the crumb tray.
Hold the toaster in the upright position; pull the crumb tray out from the
side opposite of the toasting controls by sliding it out and away from the
toaster bottom (Fig
1).
Empty the crumbs over a garbage can or sink as
crumbs will fall upon release of the tray. To replace crumb tray, slide back
into toaster. A click will sound when the tray has locked into place properly.
NOTE: It is recommended to clean the crumb tray regularly.
REMOVING LODGED TOAST:
If a piece of toast becomes lodged in the toaster, unplug the toaster and
allow it to cool. Turn the toaster upside down, and shake whatever is stuck
loose.
CAUTION: NEVER USE A FORK OR SHARP-EDGED UTENSIL TO REMOVE
TOAST OR TRY TO REMOVE ANYTHING THAT IS STUCK INSIDE THE
TOASTER WHILE IT IS IN OPERATION OR PLUGGED IN. DOING SO MAY
DAMAGE THE HEATING ELEMENT AND CAUSE SEVERE PERSONAL INJURY.
6
Publicidad
Tabla de contenido
