Power Off - Bresser 9630200 Instrucciones De Uso

2. Via USB connection with a computer
In ON mode connect the camera with a computer using a
USB cable. The device will be shown as a flash drive and
you can easily start viewing images on the computer's
screen.

3.6 Power off

Switch the On/Off lever to OFF position to power off the
camera. Please note that even in the OFF mode, the cam-
era still consumes certain power at μA level. Therefore,
please remove the battery if the camera will not be used
for a long time.
4. Troubleshooting
4.1 USB device is not recognized by the computer
This circumstance occasionally occurs in some OEM ver-
sions of Windows. It is not caused by a defect device. An
update of the USB drivers on the notebook or PC in most
cases solves the problem.
In case an update of the driver does not result in a satisfac-
torily solution it is recommended to proceed as described
below (the manufacturer takes no liability for any loss or
damage caused by running this process!
20
All manuals and user guides at all-guides.com
Delete the so-called 'Ghost Devices' (devices that are not
currently connected to the computer). Background infor-
mation: Windows generates an entry in its system prefer-
ences for each new USB device (e.g. USB stick) for each
USB drive it is plugged into. At every start of the computer
Windows will search for this unit. This delays detection of
USB devices as well as the launch of Windows itself and is
responsible for the failure to recognize the USB port!
).
1