Valex 1600L Instrucciones Para El Uso E Instrucciones De Seguridad página 7

Pre-cautiOns and guidelinesFOr using tHe MOWer
1) Before beginning to cut the lawn make sure there are no stones or
other solid objects that could be ejected by the mower, damaging
the blades and risking accidents. Remove any solid objects and
while mowing the lawn, look out for any others that may have
been missed (fig. H). Use the machine only on turf.
2) Walk, do not run. Keep both hands on the handle top and be
careful on moving the feet.
3) Advance at a constant speed, this gives much better results.
4) Take special care on slopes, cutting crossways and not up and down.
5) Pay particular attention when changing direction while on a slope.
6) Do not try to use the mower on very steep slopes with gradients
over 15%.
7) Extreme caution must be taken when reversing, backing up and
when pulling the mower towards you.
8) If the blade should hit a stone or solid object, switch off the mower,
unplug the cable and wait for the blades to come to a standstill.
Check the outside of the machine and, if you find or even doubt
something may be broken, stop using the mower and have it
checked by a specialist. Only use genuine spare parts.
9) When cutting, always drag the power cable behind the mower and
always keep it on the side already cut. Avoid taking routes that
may obstruct the free movement of the extension cord (fig. I).
10) Make several runs; adjust the cutting height so as not to overload
the motor.
11) Empty the grassbox when it is full, to prevent blocking the grass
ejection port and overloading the motor.
12) Avoid mounds of cut grass so that the grass ejection port does not
become clogged and to save the motor from useless overloads.
13) Do not hold the extension cable.
14) Before each use, check the status of the extension cable. If
damaged, remove the plug plugged in the building.
15) If the machine vibrates, turn it off immediately, disconnect the
power and conduct a visual inspection.
16) Do not cut the grass if the soil is sandy or gravelly.
17) Pay attention to things like protruding manholes, paving, tree
roots, watering nozzles, lighting points. Accidental contact of
the blade may cause damage to the machine and cause failure.
18) the mowers using universal motor are equipped with protection
with automatic reset overload. in the case of intervention cool
the electric motor.
Maintenance
Warning! Before carrying out any controls or maintenance,
make sure the motor is switched off, that the blade has stopped
and the power cable has been unplugged from the switch.
Regular care of your mower will ensure efficiency and prolong the
life of your machine.
Clean the machine with a soft brush or cloth.
Do not use water sprays or solvents to remove dirt.
The blade receives the most wear and tear. Periodically check it is
sharp and firmly fastened.
A blunt blade reduces the performance of the machine.
If the blade is worn out it should either be sharpened or replaced.
If the machine vibrates, the blade is out of balance or bent by an
accidental blow.
At every use, carefully check the condition of the machine, of the
blade, power cable and electrical connections.
sHarPening and cHanging Blade (Fig.l)
Warning! Wear work gloves and disconnect the mower from
the mains.
- Unscrew the blade's fastening screw.
- The blade should be sharpened by setting it in a clamp and uniformly
filing the cutting edge. Check it is balanced.
- If the blade is worn and needs changing only use genuine spare
parts as specified in the attached sheet.
- Replace the blade following the direction of rotation and fix it
carefully.
Do not replace the screw in plastic with a metal screw, use only
original spare parts.
All manuals and user guides at all-guides.com
if the machine does not start:
- check the electrical connections
- check the extension cord or change power socket
- check the main switch in the house
-press the button and then pull the lever switch
if the motor stops:
- check the electrical connections
- check the extension cord or change power socket
- check the main switch in the house
- increase cutting height
- wait for the automatic reset of overload protection (if present)
- make sure that the grass ejection port is not clogged.
if the grassbox does not fill up:
- adjust the cutting height
- make sure that the grass is not wet
if the cut is not satisfactory:
- adjust the cutting height
- if the blade is blunt, sharpen it
if the machine vibrates
- check the blade mounting
- offset or replace the blade
cautiOn! if after the above checks the machine does not work
correctly or in case of malfunctions different from those listed,
have it checked by an authorised service centre. always refer to
the machine model and serial number indicated on the rating plate.
- After each use, carry out a general cleaning of the entire machine
and its ancillary parts (see maintenance paragraph); this prevents
mould from forming.
- Keep the machine out of the reach of children, in a safe, dry, tem-
perate and dustfree place.
- Store the machine away from direct sunlight, if possible in a dark
or barely lit place.
- Do not store in a nylon bag as this could encourage the formation
of damp patches.
- At the end of the cutting season the machine should receive an
overall cleaning and thorough check-up of the condition of its
components.
- The handgrip can be folded to take up less space.
dangerous for the environment and for human health. For this rea-
son they must never be disposed of together with domestic waste,
but collected separately in specific collection centres or returned to
the retailer when similar new equipment has been purchased. The
illegal disposal of such equipment may result in prosecution to the
full extent of the law.
The product is protected by law against non-compliance with the de-
clared characteristics provided it is used only in the manner described
in the instructions, it has not been tampered with in any way, it has
been stored properly, has been repaired by authorized and, where
applicable, have been used only original spare parts.
In the case of industrial or professional use or when using such a
guarantee is valid for 12 months.
To issue a claim under warranty you must present proof of purchase
to your dealer or authorized service center.
trOuBlesHOOting
stOrage
deMOlitiOn:
Electric and electronic waste may contain substances that are
Warranty
- 7 -