Removable Bars - Miele APLW 511 Instrucciones De Manejo

en - Areas of application

Removable bars

34
The bars  and  on the mobile unit can be removed to accommod-
ate modules with tall load items on the middle or bottom level.
To do this:
Unscrew the knurled nuts on the right side of the bar.

Lift the bar from the screw, slide it to the left and pull it out of the

guide on the left side.
After the modules have been removed, follow the instructions in re-

verse to refit the bar.
The bar  must be fitted to the mobile unit in order to insert mod-
ules on the middle level. Therefore, the modules on the bottom level
must be loaded and the bar  must be fitted first.
 Damage due to bending.
Without the front bars, the mobile unit can bend during transport.
Only use the mobile unit with the bars in place.
Only carry the mobile unit with the bars in place.