LF allen + roth 52052 Instrucciones De Montaje página 7

ASSEMBLY INSTRUCTIONS
1. Check that the control knob (I) for the gas
supply system is turned to the "OFF" position
before starting any assembly.
2. Remove door from body (B) and place propane
gas tank (not included) into the metal stand inside of
the body (B).
3. Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the body (B) to the cylinder valve by
turning the regulator coupling nut clockwise. Make
sure it is fastened securely and tighten connections
by hand only.
1
2
3
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
7
PRESSURE
RELIEF VALVE
CYLINDER VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
I
B