Using Your Toaster - Highland TA1416B-UL Manual De Instrucciones

PACKAGE CONTENTS
It usually emits an odor for the first use as there is manufacturing residue or oil remained in the
toaster or heat element. It is normal and will not occur after several times use. Before toasting
the first slice of bread it is strongly suggested to operate the appliance following below instruc-
tions, except without bread.

USING YOUR TOASTER

• Only regular slices can be placed into the bread slot.
Note: Make sure the crumb tray is completely positioned in place before using.
• Plug the power cord into the outlet.
• Set color control knob to your desired color. There is a 6-position level, the lowest is white and
the highest is puce. The bread slice can be toasted to golden color at the position of "3",bread
on the toast rack can be toasted at the position of "2".
• Press carriage handle down vertically until it is positioned in place, the 'Cancel' indication will
be illuminated, and toasting begins. Once the bread has been toasted to the preset color, the
carriage handle will automatically spring up, and you can remove the bread readily.
Note: The carriage handle can only be latched when the appliance connects to the power
supply.
• During the toasting process, you may observe the toasting color. If it is satisfactory, you may
interrupt the toasting process by pressing the Cancel button at any time.
• If the bread has been taken out from refrigerator, set control knob to desired color.
Press carriage handle down vertically until it is positioned in place, then press DEFROST
button and the indicator of DEFROST will be illuminated. In this mode it will be toasted to your
desired color.
• If you want to reheat the cold toasted bread, press the carriage handle down vertically until it is
positioned in place, then press REHEAT button and the indicator of REHEAT will be
illuminated. In this mode toasting time is fixed, so long as time is running over, the carriage
handle will automatically spring up and end the reheating process.
4