FOCUSEAT U-AH0075R02N3OTG Instrucciones De Montaje página 4

FOCUSEAT Assembly Instructions
1. Insert chair wheels into chair
base by pressing the stud
firmly into the hole on the
bottom of the base.
3
2. Install the gas lift and gas lift
cover into the top of the chair
base by placing the larger end
into the hole in the center of
chair base.
Place the gas lift cover over the
gas lift with the larger opening
facing down.
3. Place completed chair base
assembly to the side.
4. Mechanism assembly and armrests assembly.
A. Remove the ten screws from the seat cushion bottom
using L Shape wrench provided.
B. The mechanism is labeled with a arrow showing the
"front"of the unit that needs to be installed facing
the front of the chair.
C. The two armrests are labeled "left" and "right". Attention
that attach the left armrest to the left side of the seat
cushion and the right armrest to the right side of the
seat cushion.
D. Using the ten screws attach the mechanism and the
two armrests to the seat cushion and make sure the
bolts are screwed in tight.
4