To Charge The Battery; Troubleshooting - Husqvarna 100-B380X Manual De Usuario

TO CHARGE THE BATTERY

CAUTION:
surrounding temperature is between 5°C (41°F) and 40°C
(114°F).
1. Put the battery in the battery charger. When the charging LED on the
battery charger comes on, the battery is connected correctly to the
battery charger.

TROUBLESHOOTING

Symptoms
Battery temperature and error LED flashes.
Error LED flashes.
Error LED constant light.
The battery LEDS flashes and the battery does
not start.
1496 - 005 - 30.11.2021
Only charge the battery when the
Cause
The battery is too hot or cold.
Temporary error.
Permanent error.
The FOTA update was not done correctly.
2. The battery is fully charged when all LEDs on the LED indicator on the
battery are on.
3. Remove the battery from the battery charger.
TO FAST CHARGE THE BATTERY
1. Put the battery in the battery charger.
2. Push the fast charge button.
3. To stop the fast charge, push the fast charge button.
Solution
If the battery is too hot, let it cool down for a mini-
mum of 15 minutes.
If the battery is too cold, move it indoors (+10C)
for a minimum of 15 minutes.
Push the ON/OFF button for 3 seconds or until the
battery is off. Wait 10 seconds. Start the battery.
Put the battery in the charger.
Speak to your dealer.
Push the ON/OFF button for min. 5 seconds to re-
start the battery.
5