• Pinch Hazard - Keep hands clear of moving parts during assembly,
folding and unfolding.
• Ensure that all the locking devices are engaged before use.
To unfold stroller:
1.
Lay stroller on floor with front wheels and front
footrests down, contacting the floor (Fig. 1).
NOTE: Always check that floor is clean
and dry before laying stroller on
floor.
2.
Lock parking brake.
3.
Locate Retention Strap on one side of the stroller
(Fig. 1). Push down on stroller handle and unhook
Retention Strap Latch by sliding Latch down so stroller
peg aligns with bigger hole on latch (Fig. 2).
4.
Slide Latch off stroller peg (Fig. 3).
5.
Repeat steps 3 and 4 on opposite side to unhook
Retention Strap.
6.
Pull up on handle to unfold the stroller (Fig. 4)
and then with a quick snap, push down on
handle to lock in unfolded position (Fig. 5).
Push down on side frame to ensure stroller is
in locked open position.
Lift on handle to check that stroller handle
is locked in the unfolded position on both sides.
Unfolding and Folding Stroller
WARNING
Fig. 4
Retention
Strap
Latch
10
Fig. 1
Style May Vary
Fig. 2
Fig. 3
Fig. 5