Instant Power Location; Installation Instructions - Schumacher Electric INSTANT POWER IP-1825 Manual Del Usuario

3. PREPARING TO USE THE INSTANT POWER
WARNING! RISK OF CONTACT WITH
BATTERY ACID. BATTERY ACID IS A
HIGHLY CORROSIVE SULFURIC ACID.
3.1 Be sure the area around the battery is
well ventilated while the Instant Power is
being used.
3.2 Clean the battery terminals before using
the Instant Power. During cleaning, keep
airborne corrosion from coming into
contact with your eyes, nose and mouth.

4. INSTANT POWER LOCATION

WARNING! RISK OF EXPLOSION AND
CONTACT WITH BATTERY ACID.
4.1 Locate the Instant Power as far away from
the battery as the DC cables permit.
4.2 Never place the Instant Power directly
above the battery being jumped; gases

5. INSTALLATION INSTRUCTIONS

5.1 Remove all cord wraps and uncoil the cables prior to using the Instant Power.
6. FEATURES
1 2
7. CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER
IMPORTANT: CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS TO KEEP
THE INSTANT POWER'S INTERNAL
BATTERY FULLY CHARGED.
7.1 Use of an improper extension cord to
charge the Instant Power could result in a
risk of fire and electric shock. Make sure:
• That the pins on the plug of the extension
cord are the same number, size and shape
as those of the plug on the Instant Power.
All manuals and user guides at all-guides.com
3.3 Determine the voltage of the battery by
3.4 Make sure that the Instant Power cable
4.3 Do not operate the Instant Power in a
3 4 5
7.2 To reduce the risk of electric shock unplug
7.3 When charging the internal battery, work
• 4 •
Use baking soda and water to neutralize
the battery acid and help eliminate
airborne corrosion. Do not touch your
eyes, nose or mouth.
referring to the vehicle owner's manual
and make sure that the output voltage of
the Instant Power is correct.
clips make tight connections.
from the battery will corrode and damage
the Instant Power.
closed-in area or restrict the ventilation in
any way.
1. Heavy-duty battery clamps
2. 12 Volt DC power outlet
3. Charging status LEDs
4. Internal battery status LEDs
5. Internal battery status button
• That the extension cord is properly wired
and in good electrical condition.
• That the extension cord has a wire size of
18 gauge (AWG) [0.82 mm
is 50 feet (15.24 meters) long or less.
the Instant Power before attempting any
maintenance or cleaning.
in a well-ventilated area and do not
restrict the ventilation in any way.
] or larger and
2