Maintenance; Technical Specifications - Kunft KWH4209 Manual De Instrucciones

and it suddenly decreases by 10 ºC, the 'window open' sensor
function will turn on (the 'window open' sensor function only works
after pressing the button for this function on the remote control).
Pic 1: I power
Pic 3: ECO mode
• Press the "PROG" button for 3 seconds to set the local week timer
(the week day will twinkle), press "+" and "-" to adjust. Hold the
"PROG" button to set the local minutes" (the minutes will twinkle),
press "+" and "-" to adjust.
• Press the "PROG" button to set the weekly timer cycle. The first
is to set the day of the week and it starts with Sunday; press "+"
or "-" to make the adjustment. Press the "PROG" button again to
set the time, press "+" or "-" to make the adjustment; this starts
with 00:00. Press "MODE" to set the heating mode. The default
is ECO mode.
Pic 5: I mode Pic 6: II mode
Pic 8: ECO mode
Pic 2: II power
Pic 4: 'Window open' sensor function
Pic 7: ECO mode
Pic 9: 'Window open' sensor
12
wall mounted heater
Setting process:
→
Time setting
Week setting

2.3. Maintenance

• Please make sure you switch the power supply off and pull out the
plug before cleaning.
• Wait for the heater to cool down and clean the body with a damp
cloth, washcloth or cleaner.
• DO NOT ALLOW water into the appliance. Do not place it close to
naked flames to avoid the heater from changing colours and distort.
• DO NOT use soap or chemicals (like acids, thinners, gasoline,
benzene, etc.), which may damage the heater's housing.
• Allow sufficient drying time before operating the heater again.
• Clean the air inlets and outlets regularly with a vacuum cleaner (if
the heater has a regular use, at least twice a year).
• When the unit is not in use, we recommend that the heater is re-
packed, after being wiped, in its original packaging and stored in a
cool, dry place.
• Warning: Do not touch the appliance while it is working and do not
cover the air outlet and inlet.

3. TECHNICAL SPECIFICATIONS

220-240 V ~ 50-60 Hz
2000 W
EN
KWH4209
→
Heating mode
13