Getting Started; Charging The Battery - Reliance Orbic Manual De Usuario

7. Getting Started

7.1 Charging the battery

The Tablet has a built-in battery. Before using the device for the first time, you must
fully charge the battery. Use only the 5V power adapter provided with the device, or
alternatively the Tablet can be charged via a USB cable to a PC or other
USB charging source. Unauthorized chargers can cause batteries to explode or damage
your device.
When your battery charge is low, the device will emit a warning tone and display a low
battery message. The battery icon will also be empty. If the battery charge becomes
too low, the Tablet will automatically power off.
If the battery is completely discharged, the Tablet will not turn on. Allow a
depleted battery to charge for a few minutes before you try to turn on the device.
Charging via the power adapter
1. Connect the power adapter to the Power-in socket.
2. Plug the power adapter into a power outlet.
Charging via USB
1. Connect the USB cable to the micro USB socket.
2. Plug the USB cable into a USB power source (power adapter, PC, Laptop etc.).
When it is charging, the battery symbol in the bottom right hand corner of the desktop
will show a charging (lightning) symbol
When the battery is fully charged (no lightning symbol in the battery icon), unplug the
power adapter or USB cable from the Tablet and then from the power socket. To save
energy, unplug or turn off the power adapter at the socket, when not in use.
Note: You can use the Tablet while it is charging, but it may take longer to charge.
While the Tablet is charging, the touch screen may not function correctly. If this
happens, unplug the power adapter from the device in order to use it.
While charging, the Tablet may get warm. This is normal and should not affect your
device's lifespan or performance.
If your Tablet is not charging properly, please contact support (see chapter 11).
Connecting the power adapter or USB cable improperly may cause serious damage to
the Tablet, the power adapter or the USB power source. Any
damage caused by misuse is not covered by the warranty.
All manuals and user guides at all-guides.com
.
10