Serial Numbers; Product Cleaning - Martinelli MILANO Viaggio 1 Duo-Fix Manual Del Usuario

• slip the booster cushion off if there is one (point 21);
• unfasten the safety harness (point14);
2 6• unfasten the straps from the back attachment point;
2 7• release, from the back, the safety harness straps and pull
them away from the front;
2 8• release, from the back, the shoulder pads and pull them
away from the safety harness from the front;
2 9• slip the head rest off from the top;
3 0• unfasten, from underneath the frame, the buckle of the leg
divider strap (fig. a) and extract the strap from the pad of
the leg divider (fig. b);
3 1• pull the lining upwards to remove it, checking that the
strap goes through the opening.
Maintenance of the padding
Brush the fabric parts to remove dust.
• Machine wash at a maximum of 30°C with a delicate wash
setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
°
30
How to replace the lining on the
Viaggio1 Duo-Fix ASIP car seat
To replace the lining of the Viaggio1 Duo-Fix ASIP car seat:
3 2• insert the safety harness from underneath the frame and
thread them through the openings at the base of the seat.
Insert the strap in the lining of the leg divider;
3 3• attach it to the opening in the frame
3 4• attach the strip to the attachment point of the leg divider
strap
3 5• thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
3 6• Thread the head rest – make sure the red strip is passed
through the opening in the fabric.
All manuals and user guides at all-guides.com
• Thread the shoulder straps in the safety harness.
3 7• Insert the safety straps in the seat in this order: begin with
3 8• extend the straps and insert them in the seat's frame (the
3 9• fasten them properly in the back, as shown in the picture.
• fasten the safety harness straps (point 17)
IMPORTANT: the straps must not be twisted around.
4 0• fasten them to the back attachment point, threading them
• apply the booster seat if the baby is still small.
4 1• The name of the product, production date and serial number
4 2• The approval label of the Viaggio1 Duo-Fix ASIP is behind
4 3• Production date of the strap.
• This product requires a small amount of maintenance.
• Keep all moving parts clean and if necessary lubricate
• Clean the plastic parts periodically with a damp cloth. Do
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
• Protect the product from atmospheric agents: humidity,
• Store the product in a dry environment.
• This paragraph explains how to interpret the approval label
• The label is double because this car seat is approved for
24
the buckle of the shoulder straps and then deal with the
straps.
straps in the upper hole, the buckle in the lower one).
behind the instructions tray.

Serial numbers

of the Viaggio1 Duo-Fix ASIP can be found under the seat.
the backrest.
This information is required for any complaints.

Product cleaning

Cleaning and maintenance must only be carried out by adults.
them with light oil.
not use solvents or similar substances.
solvents or other similar products.
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
How to read the approval label
(orange label).