Blumfeldt Climax Ambient Manual Del Usuario página 63

Operation via remote control
Remove the battery insulating tape before use. The wireless remote control
signal can penetrate barriers, so it is not necessary to aim at the main unit
during operation. To ensure proper reception of the remote control signal,
please do not install the main unit in a closed metal enclosure.
Pairing a new remote control
The remote control and the main unit are paired by default. In addition, the
main unit can be paired with 3 other remote controls. Please follow the steps
below to pair a new remote control. 1:
1. Turn off the main unit, unplug it and wait for 5 seconds. Then plug it back in
and start the main unit.
2. Press the [color-] and [bright-] buttons simultaneously within 5 seconds
after power on.
After this operation, the main unit will recognize the new remote control.
Mark
EN
63