Fein ASse 636-2b Kinetik Manual Del Usuario página 9

ASse 636 -2b .book Seite 9 Donnerstag, 28. Juni 2001 8:55 08
ASse 636 - 2b Kinetik
Operating instructions for screwdriver.
Overview.
1 Bit stop
Setting the screwing depth.
2 Torque adjusting key
For setting the torque.
3 Switch
Switching ON/OFF (a),
Locking for continuous mode (b).
4 Selector switch for clockwise and
anti-clockwise rotation.
Select when power tool is at a
standstill.
5 Supplied accessories
Depth stop (c).
Magnetic holder (d) for bits.
Bit 1/4" for Phillips screws size 2,
Form H with dust protection ring (e).
Wrench (f).
For your safety.
Before using this power tool, read
and comply with:
these operating instructions,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
These operating instructions and the
enclosed safety information should be
kept carefully for later use and enclosed
with the machine, should it be passed on
or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for screwdriving and removing screws,
specially for use in dry wall construction
with fast dry-wall screws and self-drilling
screws.
Screwing should be carried out using the
bit stop.
Safety instructions.
!
Risk of injury
Hold the power tool firmly.
Only work with undamaged insert.
Beware of any concealed electric cables,
gas or water conduits; check the working
area with a metal detector, for example.
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
!
Damage to property/material
Mains voltage must correspond with the
voltage specifications on the power tool.
Personal protective equipment.
When using this power tool wear the fol-
lowing protective items:
sturdy shoes, hair net (for long hair).
EN
9