Using The Machine For The First Time; Clean And Maintenance - TEFAL CM520D10 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
J. Program signal light (blue)
K. H Button (hours)
L. ON/OFF button
M. ON/OFF signal light (red)
N. MIN Button (minutes)
USING THE MACHINE FOR THE
FIRST TIME
To ensure the first cup of co ee tastes
excellent, you should rinse the co ee maker
with warm water as follows:
Pour 1200ml water into water tank (B).
Set permanent filter (F) or filter paper in
filter holder (G) (add no co ee ground),
then cover up water tank cover.
Place drip carafe (H)on keeping warm plate.
Connect to power source, 12:00 will show on
display.
Press ON/OFF button (L) once, the red
indicator (M) is illuminated, the unit enter
making co ee state.
Press ON/OFF button (L) again the red
indicator (M) goes out and the co ee
maker stops working.
After water not dropping out any more,
you can pour the water in each container
out then clean them thoroughly, now you
can start brewing.
MAKE DRIP COFFEE
(Follow figures 2 to 8)
1.Open the lid (A), pour proper drinking
water into water tank (B) according to the
mark in the tank.
2.Set permanent filter (F) or filter paper into
filter holder (G).
3.Add ground co ee to permanent filter (F)
or filter paper with measuring spoon (E),
a spoon ground co ee power can make a
cup of top-grade co ee, but you can adjust
according to the taste yourself.
4.Cover up lid (A), then connect the appliance
to power supply source, the display will
show 12:00.
5.Push drip carafe (H) on heating plate (C),
pay attention to let centre line of carafe
aligns with that of funnel.
6.Press down ON/OFF button (L) once, the
red indicator (M) is illuminated, co ee will
drop out automatically after a while.
Note: at any time, you can take out carafe
to serve but the time cannot exceed
30 seconds, otherwise the coffee may
overflow from the edge of funnel.
SETTHE CLOCK AND PROGRAMMING
AUTOMATIC START-UP
(Only fit for making drip coffee)
The appliance has a presetting function, after
preparing:
1.Press PROG button (I), you can set current
time.
2.When LCD display CLOCK, press H button
(K) and MIN button (N) to finish currently
time from 0:00 to 23:59.
3.When LCD display TIMER, press H button
(K) and MIN button (N) to set time for auto
power on from 0:00 to 23:59.
4.Press PROG button (I) three times and
the blue signal light (J) on, the unit enter
making co ee state. The blue signal light
(J) o and red signal light (M) on, the unit
enter making co ee for when reservation
time was arrived, and will shut o after 35
minutes.
5.Press PROG button (I) four times, return to
wait.
WARNING: Do not leave the co ee maker
unattended during making the co ee, as you
need operate manually sometimes.

CLEAN AND MAINTENANCE

• Cut o
power source and let the co ee
maker cool down completely before
cleaning.
• Clean housing of co ee maker with
moisture-proof sponge often and clean
water tank, drip insulation board, funnel,
filter screen and drip carafe regularly then
dry them.
• Note: Do not clean with alcohol or solvent
cleanser. Never immerse the housing in
water for cleaning.
• Open the water tank cover, get out the
funnel and filter screen or anticlockwise
rotate the funnel, then get out the funnel
EN
27

Publicidad

Tabla de contenido
loading

Tabla de contenido