Winterage Management; Error Messages; Electric Diagram - ccei Bleu Titane RTi-U Manual Del Usuario

Installation Manual
Before starting the heater, one must ensure that the pipe of the heater is full of water:
Do not put the heater on when it may contain ice. Similarly, we must ensure that the
circuit does not contain air.
Before the first start
- Ensure that the heater starts when increasing the set temperature (beyond the
current temperature) and that water flows through the heater. The green light
should illuminate.
- Ensure that the heater stops when stopping filtration.
- Replace the filter on and make sure that the heater stops when you decrease
the set temperature.

Error messages

A shorted sensor will be indicated by "_ _". A broken sensor or probe not connected
will be reported by the "EEE". The message "EEE" will also appear when
temperature is out of range.

WINTERAGE MANAGEMENT

During the winter, switch off the heater and to drain the heater pipe.
At the restart, check the electric connections, tighten the pipe unions and the flow
switch screw.

ELECTRIC DIAGRAM

CCEI
All manuals and user guides at all-guides.com
v1.0
EN
BLEU TITANE RTi-U
p 7