Publicidad
Idiomas disponibles
Idiomas disponibles
Console Leg Installation
•
Unpack the console leg set and inspect for defects. If you have any questions, contact BOCCHI immediately
toll-free at 877-565-2221 or email BOCCHI directly at info@bocchiusa.com
•
Turn the sink upside down. Measure the distance between the 2
corners of the sink where riser tubes will connect with the sink.
NOTE: Not all sinks will have room to accommodate the mounting
flange and can be installed without.
•
Cut the front and side tubes to the correct length for the sink
model being installed, using the metal saw or a stainless-steel
pipe cutter.
•
Assemble the console let kit and tighten all connections with a
flat-head screwdriver and allen wrench.
•
Place the Console Legs and Sink in the correct location on the
wall.
•
Mark the holes for the mounting flange and sink bolts.
•
Remove the sink and console legs and drill holes for the
mounting flange and bolts for the sink.
•
Place the console legs and sink into the correct position, and
screw the mounting flanges to the wall.
•
Install the faucet(s) and drain(s) to the sink per their
manufacturers instructions. Test the faucet and check for leaks.
www.BOCCHIUSA.com
3
Publicidad
