Product Specification; Machine Elements; Noise/Vibration Information; Intended Use - Bosch GKS 75 S Manual Del Usuario

All manuals and user guides at all-guides.com
EURO • Printed in USA • BA 3 609 929 557 • GKS 75S/85S • GB • OSW 12/00
GKS 75 S/85 S.book Seite 10 Donnerstag, 30. November 2000 2:47 14

Product Specification

Hand Circular Saw
Part number
Rated input
Output power
No-load speed
Speed under load
Riving knife thickness
Cutting depth at 90°, max.
Cutting depth at 45°, max.
Base plate
Weight (without optional extras) approx.
Safety class
Saw blade dia. (max.)
Saw blade dia. (min)
Thickness of central blade body, max.
Thickness of teeth/max. crosscut
Thickness of teeth/min. crosscut
Mounting hole
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.30 Ohm, disturbances are unlikely to occur.

Machine Elements

1 Saw dust ejector
2 Suction adapter
3 Riving knife attachment
4 Swinging protective guard
5 Clamping flange
6 Clamping bolt with washer
7 Riving knife
8 Motor spindle
9 Mounting flange
10 Handle
(rotatable for depth-of-cut adjustment)
11 Winged screw for cutting angle setting
12 Winged screw for parallel guide
13 Base plate
14 Parallel guide
15 Switch lock
16 On/Off switch
17 Allen key
18 Cutting depth scale
19 Cutting angle scale
20 Cut mark
Not all of the accessories illustrated or described are
included as standard delivery.
10
GKS 75 S
0 601 652 0..
1 600 W
1 000 W
4 600 RPM
3 100 RPM
1.98 mm
75 mm
53 mm
200 x 400 mm
7.3 kg
/ II
210 mm
200 mm
1.8 mm
2.8 mm
2.2 mm
30 mm

Noise/Vibration Information

Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 90 dB (A); sound
power level: 103 dB (A).
Wear ear protection!
The typical hand/arm vibration is below 2.5 m/s

Intended Use

The machine is intended for cutting wood length-
ways and crossways in straight lines and at mitred
angles of up to 45° on a firm surface.
GB
GKS 85 S
0 601 653 0..
1 700 W
1 100 W
4 000 RPM
3 000 RPM
1.98 mm
85 mm
60 mm
200 x 400 mm
7.3 kg
/ II
230 mm
225 mm
1.8 mm
2.8 mm
2.2 mm
30 mm
2
.