Hawke 46100 Manual Del Usuario página 4

QUICK START
A.
1. Insert SD card and 8x AA batteries.
2. Push the power switch into the "ON" position.
3. The menu will be displayed on screen.
4. Navigate through the menu using the up and down arrow buttons.
5. Press the "OK" button to select the flashing option. Make changes to its setting using the "Up"
and "Down" buttons. Press "OK" to confirm and save the setting.
6. The camera has three capture modes: 1P (1 image), 3P (3 images) and MOVIE. These are found
in the menu under MODE.
7. The camera has three PIR sensitivity (motion detection) settings: "H" (high), "M" (medium) and
"L" (low). The PIR switch is located under the display screen. If you want the camera to detect
long distance targets or small animals, use the "H" (high) sensitivity setting.
B.
8. When all settings have been confirmed, press the "Setup" button. The display will turn off and
the camera is ready to capture photos/videos.
9. Place the camera in the desired location with a clear view of the intended target.
• Ensure the power switch is in the "OFF" position when not in use.
• Provided the batteries still have power and have not been removed, the setup configuration will
be stored for the next time you use the camera. Simply press the "Setup" button to turn the
display screen off and start photo/video capture.
4