General Information - A-iPower PWE1801 Manual Del Propietario E Instrucciones De Operación

SETUP

General Information

Water Use only cold water.
screen.
Do not operate pressure washer without adequate water supply.
Pressure Pressure setting is pre-set at factory.
Adjustment
High Pressure There are no serviceable parts to the high-pressure pump. Do not
Pump attempt to repair or service the pump, as you may damage it and void
your warranty. If you feel that the pump needs service, please call our
customer service department at 1-855-888-3598.
Do not allow water to freeze in pump. If product is stored in an area
that will have temperatures of below 32° F, 0°C, make sure all water is
removed from the pump, or a suitable pump protection product has been
used. Failure to protect the pump form cold temperatures will cause
damage and possibly void your warranty.
High Pressure Be aware of the hose and its location while using the product. Don't
Hose allow the hose to get tangled or kink, as this can cause damage to the
hose. DO NOT attempt to move unit by pulling on high-pressure hose.
Soap / Use only soaps and chemicals detergents designed for pressure
Chemicals washer use. Always follow detergent manufacturer's instructions on
industrial solvents.
Nozzle Always keep nozzles clean and unclogged. Use the nozzle needle to
clean if clogged.
Storage / The pressure washer is equipped with places to store your accessories
Winterizing as shown in daigram on page 9.
• Place spray gun into gun holder
• Place nozzles in the proper panel.
• Coil pressure hose and hang on hanger, or on reel if so equipped.
Cover pressure washer and store on a cool dry location out of the reach
of children. Do not store outside, or in an area exposed to rain or snow.
CAUTION: Cold storage location
• If product will be exposed to temperatures below 32° F / 0° C during storage, the
use of a pump protection product (not included) is required. Use the pump protection
product per the pump protection manufacturer's instructions.
• Failure to prepare the pump for exposure to cold temperature will cause damage to
the pump and void your warranty.
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
12