Learn Scenario - LEGRAND 882 05 Manual Del Usuario

All manuals and user guides at all-guides.com
Operation
Using its 1, 2, 3 or 4 keys this product can simultaneaously control sets of products (actors) that have been associated
(1)
with it during the learn phase . It is then the leader of the scenario
The products controlled by the scenario control can be :
- radio products.
- or PLC products via the PLC/RF Cat. No. 036 06 / 036 29 interface.
The pocket scenario control is always the central control point (leader) of a scenario. It can control lighting, opening
or heating points as required.
(1) Learn phase: Operation to associate products so that they can be controlled simultaneously from a central point.
This association is carried out by applying the learn scenario procedure on page 12.
(2) Scenario: Corresponds to the set of products (actors) that are associated with a command key.
Key
The indicator lamp The indicator lamp
goes off blinks slowly

Learn scenario

Step 1: Start the learn phase (on the LEADER)
Press LEARN
Step 2: Add an actor to the scenario (on the ACTOR)
Press LEARN
To add a number of products to the scenario, repeat operations
Step 3: Record the scenario (on the LEADER)
Press LEARN
(2)
.
11
The indicator lamp
blinks quickly
Press the command key that is to
control the scenario
Press the command key that is to be
associated with the leader
and for each actor
The indicator lamps of all products go off
The scenario is recorded
12
The indicator lamp
flashes