Adjusting The Settings / Ajuste De La Configuración - Sony HT-ST3 Manual De Instrucciones

Adjusting the settings / Ajuste de la configuración
MENU
 
/
ENTER
RETURN
16
Press MENU on the remote control, then select the desired setting using
Menu
DRC
LEVEL (DYNAMIC RANGE
CONTROL)
SYNC
(AV SYNC)
DUAL
(DUAL MONO)
S. OPT
(SOUND OPTIMIZER)
AUDIO
HEQ
(HARMONICS EQUALIZER)
AAV
(ADVANCED AUTO
VOLUME)
CTRL
(CONTROL FOR HDMI)
P. THRU
HDMI (PASS THROUGH)
ARC
(AUDIO RETURN
CHANNEL)
BT.STBY
(BLUETOOTH STANDBY)
SET BT
AAC
(ADVANCED AUDIO
CODING)
Function
You can enjoy Dolby Digital sound at low sound volumes. (ON/AUTO/OFF)
ON: Compresses sound in accordance with the compression information
contained in the content.
AUTO: Automatically compresses sound encoded in Dolby TrueHD.
You can adjust the sound when the image and the sound are not in sync. (1 – 4/
OFF)
You can enjoy multiplex broadcast sound of Dolby Digital audio. (M/S (main and
sub channels)/MAIN (main channel)/SUB (sub channel))
Adjusts the sound so that it is reproduced dynamically and more clearly even at
low sound volumes. (ON/OFF)
Reproduces the very low volume sounds that tend to be eliminated by audio
compression. (ON/OFF)
Note: HEQ functions only when "ANALOG/BT AU" is selected. This does not function
with any other inputs, even though the item is displayed on the front panel.
Reduces the volume discrepancies between different programs or between
programs and commercials. (ON/OFF)
Switches the Control for HDMI function on or off. (ON/OFF)
For details, refer to the Reference Guide.
Sets the power saving mode of the pass-through function of HDMI signals.
(AUTO/ON)
AUTO: Outputs signals from the HDMI OUT ARC (TV) jack of the system in
standby mode when the TV is turned on. This setting saves power in
standby mode compared with the "ON" setting.
ON: Always outputs signals from the HDMI OUT ARC (TV) jack in standby mode.
Note: This item appears only when "CTRL (CONTROL FOR HDMI)" is set to "ON."
Allows you to listen to digital sound from a TV compatible with the Audio Return
Channel (ARC) technology is connected using an HDMI cable. (ON/OFF)
Note: This item appears only when "CTRL (CONTROL FOR HDMI)" is set to "ON."
When the system has pairing information, the system is in BLUETOOTH standby
mode even when it is turned off. (ON/OFF)
Note: During BLUETOOTH standby mode, the BLUETOOTH indicator flashes in
blue slowly.
Sets whether or not the system will use AAC via BLUETOOTH. (ON/OFF)
Note: If you change the setting when the system is connected with a
BLUETOOTH device, the system will be disconnected from the device.
 
/ /ENTER/RETURN.
Default
AUTO
OFF
MAIN
OFF
ON
OFF
ON
AUTO
ON
OFF
OFF